FROM RRP. $999.99
The PENN International VI series is designed and manufactured in the USA of domestic and imported components. Precision machined from high-strength, lightweight, aircraft grade aluminium in our Philadelphia machining centre. Our experienced crew has been designing and producing durable, high-quality reels in this facility since 1932. The VI consists of a large stainless steel gear train for strength and speed, and a Dura-Drag system which results in a smoother start up and virtually eliminates hesitation, even under extreme drag settings.
| SKU | MODEL | COLOR | MONO CAPACITY YD/LB | MONO CAPACITY M/MM | BRAID CAPACITY YD/LB | BRAID CAPACITY M/MM | REEL HANDLE POSITION | ANTI-REVERSE FEATURE | GEAR RATIO | RECOVERY RATE | DRAG MATERIAL | BEARING COUNT | MAX DRAG | REEL SPOOL MATERIAL | DRAG TYPE | WEIGHT | PRICE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1370776 | INT16VIS | Gold | 1035/16 975/17 770/20 | 950/0.39 890/0.41 705/0.46 | 890/65 765/80 655/100 | 810/0.39 700/0.49 600/0.51 | Right | Multi-Stop | 5.2:1 / 1.6:1 | 48/14 | Dura Drag | 4+1 | 20lb | 9.0kg | Aluminum | Lever Drag | 1685g | $999.99 |
| 1370783 | INT70VIS | Gold | 1085/50 960/60 685/80 | 990/0.71 880/0.76 630/0.89 | 2230/100 1855/130 630/200 | 2040/0.51 1695/0.64 1250/0.72 | Right | Multi-Stop | 3.1:1 / 1.5:1 | 40/19 | Dura Drag | 4+1 | 55lb | 24.9kg | Aluminum | Lever Drag | 3338g | $1,299.99 |
| 1370785 | INT130VIS | Gold | 1330/100 1005/130 870/150 | 1215/0.96 920/1.11 795/1.19 | 5025/100 4175/130 3085/200 | 4595/0.51 3820/0.64 2820/0.72 | Right | Multi-Stop | 2.3:1 / 1.1:1 | 41/19 | Dura Drag | 5+1 | 100lb | 45.4kg | Aluminum | Lever Drag | 7230g | $2,199.99 |
| 1419188 | INT16VISS | Silver | 1035/16 975/17 770/20 | 950/0.39 890/0.41 705/0.46 | 890/65 765/80 655/100 | 810/0.39 700/0.49 600/0.51 | Right | Multi-Stop | 5.2:1 / 1.6:1 | 48/14 | Dura Drag | 4+1 | 20lb | 9.0kg | Aluminum | Lever Drag | 1685g | $999.99 |
| 1419235 | INT70VISS | Silver | 1085/50 960/60 685/80 | 990/0.71 880/0.76 630/0.89 | 2230/100 1855/130 630/200 | 2040/0.51 1695/0.64 1250/0.72 | Right | Multi-Stop | 3.1:1 / 1.5:1 | 40/19 | Dura Drag | 4+1 | 55lb | 24.9kg | Aluminum | Lever Drag | 3338g | $1,299.99 |
| 1419237 | INT130VISS | Silver | 1330/100 1005/130 870/150 | 1215/0.96 920/1.11 795/1.19 | 5025/100 4175/130 3085/200 | 4595/0.51 3820/0.64 2820/0.72 | Right | Multi-Stop | 2.3:1 / 1.1:1 | 41/19 | Dura Drag | 5+1 | 100lb | 45.4kg | Aluminum | Lever Drag | 7230g | $2,199.99 |
BRAID READY
To eliminate slippage and the need to use monofilament backing before spooling, the Slammer IV features a textured rubber gasket at the base of the spool to tie your braid directly onto.
Fuji K-R Concept is a ‘Revolution’ in guide technology which goes beyond the important features of Fuji’s New Guide Concept of rod performance.
Tip section of the rod is solid and not hollow to virtually eliminate breakage.
A graphite inner core for sensitivity and an e glass outer layer for durability.
A manufacturer of premium rod components.
SLS3 construction uses inner and outer spiral wrap layers of carbon fibre to sandwich middle layers of alternating longitudinal carbon and glass. The spiral wraps maintain a round cross section in the blank when under load which helps the blank handle higher loads. The middle layers of unidirectional carbon and glass create the backbone of the rod by utilising the strength of glass combined with the lightweight of the carbon fibre to deliver a strong, balanced, and thin rod blank.
Our Dura-Drag material contains a special Phenolic bonding agent that prevents premature breakdown of the carbon fibre material while providing a barrier to water.
Sealed from heavy seas and spray, protecting key internal parts.
Sealed from splashes and spray, protecting key internal parts.
The Live Liner ® system was built for fishing live bait. Simply pull the switch back and the front drag disengages and runs off the rear drag.
HT-100TM drag washers provide smooth drag under heavy loads.
The CNC Gear™ is machined from premium metals which provide a durable yet smooth gear train created by the precision of CNC technology.
Full Metal Body and sideplate keep precise gear alignment under heavy loads.
